Saverpluslighting offers you a simple and affordable way to color up your environment with the 12V DC 5m iP20 RGB 5050 LED Strip. Ideal for usage in your kitchen or bedroom, it’s also everyone’s favorite to light up your home bar space. It is also fantastic to get the interior of your boat or RV ready for your next party. This Strip is not recommended for usage outside a boat or a vehicle.
The technical stuff: RGB Stands for Red-Green-Blue. 5050 RGB Chips give a 120-degree light beam and feature each of these 3 colors of LED lights within each chip: This allows to create up to two million different colors by mixing the red, green and blue at different levels. The amount of colors that can be achieved will depend on the RGB controller that you use. Note that the RGB Chip does not create a true white. Should you want to use your Strip to both enhance your décor and get an ambient white light, we strongly suggest using our RGBW Strip that includes a white LED diode within the 5050 chips.
You can customize your LED Lighting set up as this Strip can be cut every 3 LEDS. The RGB LED Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend to solder 4 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss. Quick connectors are available and are only recommended if you have 1 or 2 connections to make. Should you want to use a connector.
Certification: cULus E498952
Voltage available: 12V DC
Chip: Epistar 5050 RGB SMD
5M roll, 60LED/m. 300 LED total
Lighting angle: 120 degrees
Can be cut: All 3 LEDs (5cm)
Strip Width: iP20: 10mm
Power consumption: 14.4W / meter
Recommended transformer: 18W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -10C
Suitable for dry environment
Dimmable: Yes, through the remote / wall panel
Heat Dissipation: Not necessary, unless used in a commercial environment
Fields of Application: